The HuntingPA.com Outdoor Community banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3,899 Posts
Discussion Starter #1
Well, I finally got around to make my camera arm for when I rifle/archery hunt from my tree stand. This is probably going to be my prototype since I'm sure i'll tinker with it some more.
I did research on tree arms before and decided that instead of spending the cash and buy one, I might as well try and make one first. My dad isnt the type to throw things away, especially hardware like nuts/bolts and washers. My parents recently added on a deck to their house and of course, instead of throwing away the extra railing pieces, my dad saved them. Today was the perfect time to start to tinker with my tree arm.
What I did first is get the railing pieces and cut them to the lenghts I thought would work. First cut was 6 3/8, second was 16 3/4, next was 10 1/2.
Next thing was to hunt through the 5 gal bucket of nuts and bolts to find the correct length bolt and nuts that fit, of course I had to look for lock washers and regular washers to use for spacing. I managed to find everything I needed and began to drill 1/8 holes in the railing so as I could connect the pieces.
A couple of washers, nuts and bolts and extra railing I came up with this

As you can see from the pictures, I didnt exactly find the same size washers, but what I found seems to work for now.
Here is the tree arm extended

The longer piece in the right of the picture is what will connect to my tree stand, I thinking of using a U-bolt to connect to my treestand, but that will be tomorrow's tinkering. I did decided to paint the tree arm though in a camo pattern, the only spray paint colors I had were black and yellow, I might add more colors later.

One roadblock I ran into is that my Vanguard window mount isnt wide enough to fit over the railing, but I had a solution for that.
Not wanting to throw anything away, (wonder where I get that from), I have an old carbon fiber hockey stick that will work perfect for the window mount. I drilled a hole into the stick and I will mount the stick to the inside of the smaller railing piece, thus allowing my Vanguard window mount to attach to the tree arm.

I still have to cut the hockey stick and bolt it to the arm itself, as well as paint the stick to match the arm. The only downside at the moment is that I dont have a video camera yet, looks like a purchase of a camera will be in my future. I'm hoping the arm can handle the weight of the camera when extended, if not, then looks like i'll be making a trip to buy square tubing.
The "almost" finished product.


Feel free to use this design or ask any question, or if you want to give me some pointers, by all means.
 

·
Registered
Joined
·
1,514 Posts
nice work but now comes the camera to bad you can't make that LOL!! Good luck with videoing and shooting! hope to see the results!
 
1 - 7 of 7 Posts
Top