The HuntingPA.com Outdoor Community banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3,370 Posts
Discussion Starter #1
Anyone have a recipe to reload Federal Multi-Purpose hulls. 12 ga. hulls are 3dram eq. 1 1/8 oz with 7 1/2 shot the 20ga are 2 1/2 dram 7/8 and 7 1/2 shot. New to reloading both reloaders are mec 12 ga is a 9000 and 20 is a Grabber 8567 or should I just get some Win.AA
 

·
Registered
Joined
·
1,020 Posts
Get the 5th edition from Lyman and go from there. Or go to the powder comapny web sites they have reloading info.
 

·
Registered
Joined
·
373 Posts
Because of the paper base wad the Federal is not as good of hull as the Win. or Rem.The 9000 is a good loader but if everything is not adjusted right it can give you fits. I don't know if you got it new or used but if you are new to using it make sure you have a instruction manual
 

·
Registered
Joined
·
378 Posts
Shell: 2 3/4" FEDERAL HI-POWER PLASTIC SHELLS W/FIBER BASE WADS

Load Type Gauge Shot Wt. Powder Primer Wad Powder Wt. (Gr.) Pressure Vel. (ft/s)

Lead Shot 12 1 1/8 oz. Universal Fed. 209A Fed. 12S3 24 8,200 PSI 1200
Lead Shot 12 1 1/8 oz. Universal Fed. 209A Fed. 12S3 25 9,000 PSI 1255
Lead Shot 12 1 1/8 oz. Universal Fed. 209A Fed. 12S3 26.5 9,400 PSI 1310
Lead Shot 12 1 1/8 oz. Universal Win. 209 WAA12 24 8,300 PSI 1200
Lead Shot 12 1 1/8 oz. Universal Win. 209 WAA12 25 8,700 PSI 1255
Lead Shot 12 1 1/8 oz. Universal Win. 209 WAA12 26.5 9,700 PSI 1310
 
1 - 5 of 5 Posts
Top