The HuntingPA.com Outdoor Community banner
1 - 18 of 18 Posts

·
Registered
Joined
·
618 Posts
Discussion Starter · #1 ·
I need to use the back up to my back up bow until I get a part in that I ordered. My son is gonna use my good bow while I use my oldest bow. Its a Horton 150 lb and I have it sighted in with Horton aluminum bolts. I have been shooting the 2 blade 100 grain, standard size Rages with my regular bow. Do you think this set up will be enough energy for the Rages?? Otherwise I gotta dig out some fixed blades and get them sighted in...
 

·
Registered
Joined
·
3,908 Posts
We have had so many problems with the Rage, I would just start with the fixed blades and go from there.
If you do decide to use the rage heads, make sure the blades are turned so they can't hit the foot stirrup if they deploy before they leave the bow.
 

·
Registered
Joined
·
618 Posts
Discussion Starter · #3 ·
I just got some to try this year. A guy I work with sold me 6 for $20. I was short on cash and heads so I gave them a try. Killed deer #2 with them tonight (my kid did with my good bow). Both were quick kills, with a short recovery. But I do worry about the blades coming open early. They seem to open a bit if you bump them etc... so I find myself checking it constantly while I'm hunting. I also got new O rings to be sure they a plenty strong. Some look a little dry rotted. But they seem fairly strong, and in good shape after I shot them. I hope to re-sharpen them and re-use them.
What problems were you hearing about with them???
 

·
Registered
Joined
·
618 Posts
Discussion Starter · #5 ·
Ya really hear so much, both ways.... good and bad. It's a tough call, what to shoot.... I shot a buck back in October, went about 50 yards and crashed. Tonight my son shot a doe, went about the same and he saw her go head over heels... I do worry about the blades bumping open though...
 

·
Registered
Joined
·
618 Posts
Discussion Starter · #9 ·
Would be interesting to see with a high speed video camera from the launch.... And see if they open or try to open... I was looking at them tonight. I wonder if you would put a small light weight rubber band on the front, near (just before) where they pivot. It would just break or tear when they start to open....
 

·
Registered
Joined
·
223 Posts
i hit a doe at 30yds just behind shoulder(rage 3 blade 100 gr) and it hit ribs and went straight down not doing much damage and open up the belly. i tracked her, alot of blood but no kill. i had to bed shot her. im going back to muzzy 3 blade.
 

·
Registered
Joined
·
618 Posts
Discussion Starter · #16 ·
Lots of mixed reviews.... But you see that with a lot of broadheads.... I liked too that both deer we shot with rages this year, the heads are reusable. Just need cleaned up and re-sharpened...
 
1 - 18 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top