The HuntingPA.com Outdoor Community banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,817 Posts
Discussion Starter · #1 ·
Have a 350 Wolverine. Push start slowly stopped working and the pull starter is no longer working. Started searching a bit, changed the spark plug and still have no spark. Next thing up the line is the ignition coil ? Can't find a new replacement anywhere... Any one have any ideas or local to take a look?

Really out of my element here and don't feel like getting hosed on repair work for such an old quad.
 

·
Registered
Joined
·
5,255 Posts
Most likely its the pickup coil. Buddies warrior had same issue. you'll need the stator cover gasket to.
I use to have alot of wheelers and dirt bikes so fire away with ?'s LOL
You can find them online for under $40
 

·
Registered
Joined
·
943 Posts
If the start button slowly stopped working why not start there. Take it apart and clean it and put it back together. It's free to do minus some brake cleaner. I have to clean my YFZs at least 3 times a season to make sure it's getting good contact for xc race starts.
 
1 - 4 of 4 Posts
Top