The HuntingPA.com Outdoor Community banner

1 - 5 of 5 Posts

·
Registered
Joined
·
457 Posts
Discussion Starter #1
I have a Nite Lite Tracker light and the wires that connect the battery to the actual light came off of their "clips" and I was wondering if anyone had any ideas how to get them back on. I twisted wires together and pushed clip back on and they wont stay on.

Here are the wires.


Here are the clips.
 

·
Banned
Joined
·
4,532 Posts
Crimp then solder them as well, if I was closer I'd fix it for ya.

John
 

·
Registered
Joined
·
602 Posts
Don't just crimp them with a pair of pliers use an actual crimping tool they'll stay on much better take the plastic off and solder also if you can and use some shrink tape...you can get the clips at any auto part store or radio shack
 

·
Registered
Joined
·
5,583 Posts
john1951 said:
Crimp then solder them as well, if I was closer I'd fix it for ya.

John
Like john said, solder them on as well. Crimp connections are faulty [censored] you can see.
 
1 - 5 of 5 Posts
Top