The HuntingPA.com Outdoor Community banner

1 - 3 of 3 Posts

·
Registered
Joined
·
658 Posts
Discussion Starter #1
I have a mission 360 MXB and am shooting 22 inch 300 g bolts. The issue is for hunting I am limited to something like a Rage or other narrow mechanical. This is due to the design of the pocket where the broadheads rests. It is narrow.
My question is could I go to a longer, say 23 inch bolt, keep the same weight and not lose much speed? This would clear the pocket and give me more options for broadheads use.

Any thoughts are appreciated.
 

·
Registered
Joined
·
19,563 Posts
You could go longer or just spin your inserts to align the blades where you want them. I have the MXB 400 so I know where you are coming from. Clean Shot Archery has a nice insert called the Lock N Load. No glue required and you can easily spin it to get blade clearance.
 

·
Registered
Joined
·
214 Posts
I have the same issue. I went with a 24" Victory Archery voodoo bolts. They have a smaller diameter more like a carbon arrow so they are close to the same weight as the 22" bolts and I have just enough room to fit a fix blade. Plus a longer bolt should be more accurate.
 
1 - 3 of 3 Posts
Top