[willyp]

Which way does it come out of the slot,as to looking down the bore of the barrel??????

 

[fall gobbler]

I believe either way. (Should be the same as a TC) Use a brass punch and a light hammer to tap it out.

 

[Retiredusne8]

Per Lyman "Install the sight from Right to Left",so to remove you drift it to the right.

 

[jkhunter]

I've been looking all over the internet for this answer. I should have just looked here.

Retiredusne8, Is that drift to the right looking down the bore? so I would tap it on the left side looking at the bore or the same side as the ignition on a right hand rifle? Just want to be sure I don't break anything.

thanks

 

[Retiredusne8]

Looking from the stock to the muzzle/bore ,your lock is the right hand side,for a right hand shooter.

 

[Retired_Rusty]

Got to the below link, and download the PDFs at the bottom of the page. PDF #1 has a section showing adjustment, as well as optional sights. There is also a parts link after the PDFs, and ordering direct is as cheap as getting ordered from local shop.

http://www.lymanproducts.com/lyman/muzzle-loaders/deerstalker-rifle.php