The HuntingPA.com Outdoor Community banner

1 - 7 of 7 Posts

·
Registered
Joined
·
1,725 Posts
Discussion Starter #1
I have been shooting this crossbow with the half moon nocks that it came with as well as luminocks and nockturnas.
I have now seen that the warranty is voided if I do not use capture nocks. That is contrary to the owner's manual and warranty info that came with the bow. I understand that things change so what should I be using?
I love this crossbow!
 

·
Registered
Joined
·
18,621 Posts
On older Parkers, the recommended nocks by the factory were moon nocks. Some time ago, Parker switched their nock recommendations to the "capture" nock of their own design. Current warranty requirements are for capture nocks. I can't see Parker denying warranty work on your bow since you are using moon nocks which was the requirement at the time of the purchase.
 

·
Registered
Joined
·
3,285 Posts
I've been using the regular moon nock that came with my first generation Tornado, using GT laser II brass insert 100 gr. slick trick my bolts weight comes in at 401 grains with in the warranty requirements. Parker since requires their capture nock so this year I installed Parker lighted capture nock. all is well, they are very bright and only added a few grains of weight I only needed a slight elevation adjustment.. they zeroed nicely for me..
 

·
Registered
Joined
·
3,678 Posts
On older Parkers, the recommended nocks by the factory were moon nocks. Some time ago, Parker switched their nock recommendations to the "capture" nock of their own design. Current warranty requirements are for capture nocks. I can't see Parker denying warranty work on your bow since you are using moon nocks which was the requirement at the time of the purchase.
If your limbs were replaced recently go with capture nocks as per Parker. I was told this by the proshop
 
1 - 7 of 7 Posts
Top