[Zark]

What do you guys use to get the glue off the arrow prior to fletching.

 

[Dogface]

A dull single edge razor blade.

 

[JD3]

First I use my pocket knife and scrape at it. Then I use either rubbing alcohol or acetone to clean the shaft. They say acetone is not the best for carbon shafts. I use it but I just try not to use a lot of it. Have to be careful scraping a carbon shaft with a pocket knife since you can "cut in" to them.

 

[LifeNRA]

If its glue from a wrap, warm water and a SOS pad. From old fletchings, I have a tool that I use to scrape it off. Designed for arrows.

 

[Cutt'em all Jack]

A blow dryer works well also if you're using wraps. I use that then wipe down with rubbing alohol.

 

[gobblergetter]

I use a zip strip to remove the vanes then use a copper scourer pad to remove the glue that is left behind. Works wonders.

Here is a video I found in the summer when I had same question.
http://www.youtube.com/watch?v=agOiVjJiiTA

 

[Zark]

thanks guys

 

[steelheadcrazy]

zip strip and acetone (wife's finger nail polish remover to be exact)