The HuntingPA.com Outdoor Community banner
1 - 5 of 5 Posts

·
Registered
Joined
·
493 Posts
Discussion Starter · #1 ·
I took these out of the receiver many years ago(probably 27 to be exact) to mount a scope and of course have been misplaced or lost. Can anyone tell me what size these are or where I might find some? I see they have all kinds of screws at Midway but I have no idea what I need for my 760.
 

·
Registered
Joined
·
4,814 Posts
http://www.poppertsgunparts.com/index.htm

These guys probably have them. I can't remember what size the 760 were. I do know that the 760 and 7600 are different but again I can't remember for sure what size.
 

·
Registered
Joined
·
3,815 Posts
They are all usually the same size, the "filler screws". Stop at any 'smith. he will have a pile of them..probably give you four.
6-48 8-40 and 10-32 are the popular sizes.

BUT older 760s were not drilled and tapped from the factory, so a 'smith could drill and tap them for his favorite size.
 

·
Registered
Joined
·
493 Posts
Discussion Starter · #4 ·
Thanks fellows. "Filler Screws"......didn't know what you called them. I'll check at the local shop.
 

·
Registered
Joined
·
14,314 Posts
A lot of gun shops will have them too. Also, if you know someone that has a 760 or 7600 those fillers from their rifle should work as well....if they have them.
 
1 - 5 of 5 Posts
Top