The HuntingPA.com Outdoor Community banner
  • Hey Guest, it looks like you haven't made your first post yet. Until you make an introduction thread, the rest of the site is locked to posting. Why not take a few minutes to say hi!
1 - 3 of 3 Posts

· Registered
Joined
·
433 Posts
flints: tom fuller black flints
powder :goex 3F will workd in the bore and pan
frizzen: t/c are not great go with a lyman but fitting is needed
t/c also has new hammers :send the old one in for a new replacement type (upgrade)
T/c also has new vent liners .070 uses a allen key instead of the old type screw driver slot
 

· Registered
Joined
·
433 Posts
http://www.trackofthewolf.com/(S(4liozuaqj3jvpdqyz2dvotrl))/index.aspx
I think the old style flint hammers take 3/4x3/4"
when you order them make sure to ask them if they can give you FLAT TOPS FLINTS
t/c hammer do not like the ones with HUMPS on top the jaws are to thin and they won't fit that well in the hammer.
The lyman flints alll is needed is a little fileing to get them to fit.
I would also ask them if they have the newer vent liner for t/c
I would recommend to flip the angle on the flint to get more scape off the frizzen until you get the new lock
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top