The HuntingPA.com Outdoor Community banner
1 - 7 of 7 Posts

·
Registered
Joined
·
6,600 Posts
Discussion Starter · #1 ·
Picked up a Marlin 336 from 52' in 35 Rem.Who's reloading for it and what is your groups and recipes?
 

·
Registered
Joined
·
4,034 Posts
410-er said:
Picked up a Marlin 336 from 52' in 35 Rem.Who's reloading for it and what is your groups and recipes?
I don't have a 35 but I picked up maybe 10-15 once fired sticks of 35 brass while doing some range work at the club this moring.

If you want or can use them I'll hang on them for ya all!


Bill
 

·
Registered
Joined
·
391 Posts
I have used IMR4064 and Varget and had good results with both from a Remington 14. If I remember right loads for the 200gr Rem was just below max. Accuracy was just over an inch with usually 2 of the 3 touching.
 

·
Registered
Joined
·
185 Posts
I have the same rifle that I bought in 1968. It likes 43 grains of IMR 4350, behind a 200 grain Sierra, with OAL of 2.470, with a heavy crimp. It also likes 37 grains of Varget with the same bullet.
 
1 - 7 of 7 Posts
Top