I need to pick some ones brain on this gun.
As the post states, its a ithaca model 37 in 16 gauge.
Its my buddys gun and he want to figure out how to take the barrel off, and , what kind of clips (E- clip, C clip?)were used to hold the pin that goes through the barrle nut. i found this pic on the web, it shows the pin I am reffering to.
I would be grateful for any help.
"The only thing that stops a bad guy with a gun is a good guy with a gun."
Wayne LaPierre 12/21/12
The small cylindrical pin (on older Model 37s) will slide out about 1/2" to help in rotating the knurled nut. Once the nut is rotated/loosened a couple of turns, you will then be able to rotate the barrel 90 degrees and it will slide loose from the receiver.
R.I.P. WCO Dave Grove ... You will never be forgotten.