Re: PSE Bow Issue
Sounds like possible bearings in the cams to me....they can and do go bad over years of use. It could also be they just need greased, I would use a lithium grease (heavier lubricant than WD-40). Also may want to grease your limb bolts thoroughly as well. Every year or two I will tear bow down, and grease everything up again to ensure maintenance. Limb bolts can also get "Screechy" if they are dry and the limbs are starting to bend further as you draw. I would bet it's one of those two. Easy fix.
Nature's Ultimate Predator Wasn't Created to Prowl The Grocery Store!!