The HuntingPA.com Outdoor Community - View Single Post - h breech plug freezing uTC Omega breech plug issue
View Single Post
post #8 of (permalink) Old 09-12-2011, 11:09 PM
HOGGHEAD
Frequent Contributor
 
Join Date: Oct 2009
Location: RIVESVILLE, WV
Posts: 889
Back To Top
Re: h breech plug freezing uTC Omega breech plug issue

I also use an Anti-Seize. I use Gorilla Grease.

But I bet you habe an additional problem. Take a 12 gauge bore brush. Chuck it up in a cordless drill and run it in reverse in your threads. I will bet you have some build up on those threads. Also check the small shelf at the bottom of those threads. And make sure you run the brush down far enough to clean that shelf.

A fellow told me about that the other evening and i did it to my rifles. I thought my rifle was really clean until I did that. Trust me on this one. I would bet you have some build up of crud in there. Especially if you are shooting T-7. Tom.
HOGGHEAD is offline  
 
 
For the best viewing experience please update your browser to Google Chrome