Re: CR supports
I gathered a bunch of voting signs AFTER the elections last year to use. Just cut em in half at the top. You'll end up with 2 L shaped pieces. Grab the bottom part of the L and bend it up 90 degrease so it is parallel with the top part. Then grab the middle of the piece you just bent up and bend it down. The finished product should resemble an 'h'.
If you push both parts of the 'h' in the ground they will keep the wind from blowing it around, and you can hang your CR from the top half. I know this sound complicated but it really isn't after you do it once. Sorry I don't have pictures. There is a picture of it in the book you got when you took the course. It's on page 2 in my book. You could do the same thing with a piece of 9ga wire; I just used the sign wires because they were free. A note on gather signs, you can't legally pick them up until after 8:00pm the night of the election. I normally give contendents a couple of days to pick them up and if they’re still there 3-4 days they're mine. Hope this helps. Happy Trapping!
If at first you don't succeed.... reload!