Back To Top
Join Date: Aug 2011
Location: 3C Camp-New 5D Home
Re: Marlin 336/stock refinish?????
Easiest way is use paint stripper. Wear heavy rubber gloves, goggles . Stuff burns like heck if you get it on your skin. brush a thin coating on stock(after you remove all the metal) Let it sit for recommended time on can. Use lots of paper towels ,wipe off. You may need to do this a few times until you are down to bare wood. I have found that medium steel wool or green scrub pads help after the 2 nd application. Rinse with water but do not soak it. when wood is dry,lightly sand with 150-250 grit sandpaper and refinish with your choice of finish
"Lazy people think of the easy way to do the hard stuff"