Get Bucks on Camera, No Bait Required - The HuntingPA.com Outdoor Community
 1Likes
  • 1 Post By hunting hard
 
LinkBack Thread Tools
post #1 of 4 (permalink) Old 08-29-2019, 10:21 AM Thread Starter
Administrator
 
casey's Avatar
 
Join Date: Aug 2002
Location: milford pa-pike county
Posts: 13,689
Back To Top
Get Bucks on Camera, No Bait Required

https://www.qdma.com/get-bucks-on-ca...ign=2019-08-29

I recently moved to Illinois where feeding or baiting deer is illegal at all times of the year, and getting pictures of bucks suddenly became much more difficult. For me, trail-camera pictures control future hunting decisions, and I simply could not accept getting so much fewer pictures. I need to know which bucks to hunt. I need to be getting pictures regularly so I know when to hunt them. Although more effort is now involved, I found a three-step approach to trail-camera placement without bait that can work for anyone.

Previously, I lived in a state where placing supplemental feed outside hunting season was legal. My trail-camera strategy was very straightforward: minerals in summer, scrapes in fall, and corn for post-season inventory in winter. Although, I can no longer place minerals, corn or other bait, the principle of that approach still exists: feeding locations in summer, scrapes in fall, and back to feeding locations in winter. The trick is how to get high numbers of deer in front of a camera in the summer and winter when you may be targeting large feeding areas like ag fields or food plots. This three-prong approach worked for me.

Step 1. Funnel Movement to the Camera
Iím not talking about placing trail-cameras in natural funnels, though thatís the general idea with a non-baited approach. I am talking about forcing deer to enter feeding locations at one specific point. This requires erecting fencing or creating brush blockades with your chainsaw or heavy equipment like a skid steer. Force all the deer to enter an ag field, natural opening or food plot at one or two specific points. This is by far the most effective way to get more pictures. It can certainly require a good bit of effort in some cases, but it is well worth the time. Smaller food plots or micro attraction sites, like fruit or oak trees, may set up well for easier blockading depending on natural barriers that are available. Then, a few careful hinge-cuts with your chainsaw might be all it takes to direct most deer past your camera as they enter or leave the site.

Remember to think about how you will access the camera with minimal disturbance. By placing cameras at pinch points between two habitat types you can access your cameras along edges while likely staying out of cover, reducing the amount of pressure you place on a property. I like to place cameras on the side of the pinch point where I can access the camera without ever crossing the path I expect deer to walk.

Step 2. Hide the Camera
I used to put up my cameras over minerals or bait, and it really didnít matter what kind of tree the camera was hung on. There could be a bare, 4-inch diameter tree a mere 8 feet away from the bait pile, and deer would get accustomed to the camera because they wanted whatever was in front of the camera so badly. However, once you remove the incentive for a deer to fight against itís natural instincts to avoid a foreign object, you need to make sure the camera is much more inconspicuous.

Just like humans, deer are all individuals, and there are some that get used to the cameras very easily and others that will forever be camera-shy. If you place a camera on a fencepost, bare sapling, or camera-stick in the middle of a plot, Iím sure some resident deer will get used to it, but what about a traveling buck that doesnít come through your hunting area very often? He could see that camera from 40 yards away and avoid the cameraís field of view. I particularly want to get his picture, so I need to hide my cameras to minimize avoidance.

I like to choose small trees with multiple trunks and place the camera right above a fork or next to a branch. It doesnít hurt to back the camera with natural camouflage in the form of branches, leaves, vines or anything else that will help break its outline. Just make sure you donít block the camera lens ports or leave branches hanging in the photo frame. Itís these small additional features that help blend the camera into its surroundings. Sometimes I hang cameras above head height and angle them down to get them out of a deerís field of view, but it can be tougher to estimate the age of a buck in a photo taken from a high angle.

Step 3. Capitalize on Communal Behaviors
Deer communicate to each other not only through vocalizations but also through their scent glands. They will take advantage of objects placed in the right locations to rub their forehead, nasal and preorbital glands on these objects as well as chew on these items for added salivary scent. I like to hang frayed ropes (see the photo at the top), ďplantĒ cedar posts, or use a small sapling-holder made by Hodag called a Flex Plate (photo below). These may or may not become scrape sites in the fall, but their intention is year-round communication. By placing one of these objects at the pinch point you have created going into a feeding area you will get every deerís picture as it scent checks the licking item before it goes to feed.

Using Step 1 you have forced deer to a specific camera site. Using Step 2 you have kept deer from noticing and avoiding the camera. Step 3 allows you to get multiple pictures of a deer instead of one picture as he walks by that may or may not be a quality picture. Step 3 is where I have found the quantity of pictures really has the potential to increase.

If laws donít allow you to use bait where you hunt, you can still get plenty of great trail-camera photos. Stay in the game by funneling movements, hiding your cameras and providing an object for scent marking.
casey is online now  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 09-04-2019, 06:34 PM
Part of the Community
 
Join Date: Oct 2012
Location: 2b
Posts: 234
Back To Top
just build breeding scrapes using paul pollicks method and his lures , you will get a great inventory of what is in the woods before the season starts. He also has synthetic stuff that works wonderfully , was at his home this week and he showed me the new products and the results from his own scrape he built . good luck and be safe
NorthernPotterCo likes this.
hunting hard is offline  
post #3 of 4 (permalink) Old 09-11-2019, 06:43 AM
Diehard Outdoorsman
 
Join Date: Sep 2019
Location: conestoga,pa/Mills,Pa
Posts: 2,673
Back To Top
Casey thanks for an informative post, sounds like a lot to think about to get pictures . hunting hard that also sounds like a god idea. do you have a link or contact info for him
NorthernPotterCo is online now  
Sponsored Links
Advertisement
 
post #4 of 4 (permalink) Old 09-11-2019, 08:18 AM Thread Starter
Administrator
 
casey's Avatar
 
Join Date: Aug 2002
Location: milford pa-pike county
Posts: 13,689
Back To Top
Quote:
Originally Posted by NorthernPotterCo View Post
Casey thanks for an informative post, sounds like a lot to think about to get pictures . hunting hard that also sounds like a god idea. do you have a link or contact info for him

Here you go



https://www.realworldwildlifeproducts.com/contact/
casey is online now  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The HuntingPA.com Outdoor Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in













Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome